BQBCN - DESIGN COATS, DN812
- MSDS: BQBCN
- Manufacturer: DUNCAN ENTERPRISES
- Product Name: DESIGN COATS, DN812
- National Stock Number: 8010-00N023191
Product Identification
Product ID:DESIGN COATS, DN812
MSDS Date:10/01/1987
FSC:8010
NIIN:00N023191
MSDS Number: BQBCN
Responsible Party
FRESNO, CA 93727
US
Emergency Phone: 303-623-4884
Info Phone: 209-291-4444
Cage: 21546
Contractor
Telephone: 209-291-4444
Cage: 21546
Ingredients
LEAD MONOXIDE; (LITHARGE)
CAS: 1317-36-8
RTECS: OG1750000
Fraction By Weight: <4%
OSHA PEL 0.05 MG/M3 (PB)
ACGIH TLV: 0.15 MG/M3 (PB)
SILICA, CRYSTALLINE - QUARTZ; (SILICA DIOXIDE)
CAS: 14808-60-7
RTECS: VV7330000
Fraction By Weight: <9%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EXPOS TO HAZ INGRED CAN OCCUR IF DUST
MIST IS INHALED/INGESTED & INGRED DISSOLVES OUT OF GLASS. BECAUSE
OF CHEM STABIBILITY OF FRIT & ITS RESISTANCE TO ATTACK BY
ACIDS/ALKALI, THIS IS ANTICIPATED TO O CCUR VERY SLOWLY. OVEREXPOS
TO LEAD MAYCAUSE NERVOUS SYS, KIDNEY/BONE MARROW DMG/HARM TO
DEVELOPING FETUS.
Explanation of Carcinogenicity:CRTSTALLINE SILICA QUARTZ IARC GROUP 2B;
NTP ANTICIPATED TO BE A CARCINOGEN .
Effects of Overexposure:SYMPTOMS OF OVEREXPOSURE TO LEAD INCLUDE WEIGHT
LOSS, STOMACH CRAMPS, LOSS OF COORDINATION, JOINT AND MUSCLE PAINS.
Medical Cond Aggravated by Exposure:ABRASIVE-CAN SCRATCH EYES.
OVEREXPOSURE CAN DRY SKIN.
First Aid
First Aid:EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN:WASH WITH
SOAP AND WATER. INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
ARTIFICIAL RESPIRATION/O*2) . INGEST:CALL MD IMMEDIATELY .
Fire Fighting
Extinguishing Media:NOT APPLICABLE. MEDIA SUITABLE FOR SURROUNDING FIRE
.
Fire Fighting Procedures:THIS IS A WATER BASE CERAMIC GLAZE. IT WILL
NOT BURN.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:CLEAN UP PROPERLY WITH PAPER TOWELS AND WET
SPONGE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:WHEN USING, DO NOT EAT, DRINK OR
SMOKE. WASH HANDS IMMEDIATELY AFTER USE. KEEP SEALED. KEEP OUT OF
REACH OF CHILDREN.
Other Precautions:AVOID USING IF PREGNENT OR CONTEMPLATING PREGNANCY.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED DUST AND MIST RESPIRATOR
FOR LEAD (SUCH AS 3M 8710 OR EQUIVALENT).
Ventilation:SPRAY BOOTH THAT EXHAUSTS AWAY FROM BREATHING ZONE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLEAN SPRAY BOOTH FILTERS OFTEN.
Work Hygienic Practices:WEAR PROT CLTHG THAT IS REMOVED BEFORE EATING,
DRINKING, SMOKING/LEAVING WORK. WASH THORO, IMMED AFTER SPRAY.
(SUPDAT)
Supplemental Safety and Health
HYGIENE PRAC:IF GLAZE SPRAYING IS MAJOR PORTION OF WORK, REGULAR BLOOD
LEAD LEVEL TESTING BY YOUR DOCTOR IS ADVISABLE.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Melt/Freeze Pt:M.P/F.P Text:1800F,982C
Spec Gravity:1.5
Evaporation Rate & Reference:AS WATER
Solubility in Water:INSOLUBLE
Appearance and Odor:COLORED ORORLESS LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:FOLLOW FEDERAL, STATE AND LOCAL REGULATIONS FOR
DISPOSAL.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.